Skip to content
Lab Gruppen
Lab Gruppen PD3000 3000W Two-Channel Amplifier with Precise Power Management
Talk to a Pro
Chat with our Pros on Whatsapp
We're available from Monday to Saturday (9.30am-6.30pm GST)
Lab Gruppen PD3000 3000W Two-Channel Amplifier with Precise Power Management
MM HO
Al Shoala Building, Near Deira City Center, Port Saeed Area
Techniline Electronics Showroom, Ground Floor, Block E
Dubai DU
United Arab Emirates
MM Warehouse
Al Shoala Building, Near Deira City Center, Port Saeed Area
Techniline Electronics Showroom, Ground Floor, Block E
Dubai DU
United Arab Emirates
Pay as low as Dhs. 761.75\/mo. without fees with Tabby.
Free & Express Shipping in UAE Available.
Are you looking for a reliable two-channel amplifier with precise power management? Look no further than the Lab Gruppen PD3000. This 3000W amplifier offers 2 x 1,500 watts of power and features a proven and reliable Class D amplifier stage. With its highly efficient Switch Mode Power Supply (SMPS) and Speaker Protect Limiter, you can enjoy maximum output level and reliable driver protection. The PD3000 also includes comprehensive short circuit, DC and thermal overload protection as well as balanced XLR and TRS input connectors with optimized sensitivities.
KEY FEATURES
- Dual-channel amplifier with 2 x 1,500 watts of power
- Precise power management guarantees performance and efficiency
- Proven and reliable Class D amplifier stage
- Highly Efficient Switch Mode Power Supply (SMPS)
- Speaker Protect Limiter for maximum output level and reliable driver protection
- Precise 8-segment signal and limit LEDs for performance monitoring
- Integrated crossover with low-cut, high-cut and full-range modes
- Comprehensive short circuit, DC and thermal overload protection
- Balanced XLR and TRS input connectors with optimized sensitivities
SPECIFICATIONS:
| Number of amplifier channels |
2 |
| Peak total output all channels driven |
3000 W |
| Peak output voltage per channel |
115 V |
| Peak output current per channel |
32 A |
| Bridge mode |
No |
| Output circuit type |
Class-D |
Amplifier Outputs
| Max Output Power | |
| All channels driven | |
| 2 Ω per channel, stereo |
1000 W |
| 4 Ω per channel, stereo |
1500 W |
| 8 Ω per channel, stereo |
800 W |
Audio Performance
| THD+N 20 Hz - 20 kHz @ 1 W |
< 0.1% |
| THD+N @ 1kHz, 1 dB below clip |
< 0.1% |
| Signal-to-noise |
>90 dB |
| Channel separation (Crosstalk) @ 1 kHz |
>75 dB |
| Frequency response |
10 Hz to 20 kHz, +0.5/ -1 dB |
| Input impedance |
10 kΩ unbalanced, 20 kΩ balanced |
| Distortion,1/8 rated power |
< 0.1% |
System
| Controls | |
| Front |
Power switch Gain controls (channels A and B) |
| Rear |
Stereo / mono, switchable Xover: LF / full range / HF, switchable |
| Crossover frequency |
100 Hz |
| Indicators | |
| Power |
RDY LEDs lit green |
| Limit, per channel |
LIM LEDs lit red |
| Signal, per channel |
-30 dB, -24 dB, -18 dB, -12 dB, -9 dB, -6 dB, -3 dB, LEDs lit green/orange |
| Thermal Warning, per channel |
RDY LED blink orange |
| Thermal Warning 90%, PSU |
Both RDY LEDs blink orange |
| Thermal fault, per channel |
RDY LED blink red |
| Thermal fault 100%, PSU |
Both RDY LEDs blink red |
| Fault, channel |
RDY LED lit constantly red |
| Fault, device |
Both RDY LEDs constantly lit red |
| Connectors | |
| Inputs / link |
2 x XLR 2 x 1/4" TRS |
| Outputs |
Neutrik speakON (2 x NLT4) |
| Mains connector |
Locking IEC appliance inlet, C14 |
| Protection Features | |
| Cooling |
Two fans front-to-rear air flow, temperature controller speed |
| Amplifier protection |
Thermal and DC protection, Rail sensing and peak current limiting. |
| Load protection |
Controlled start and shutdown, behavior, DC-fault protection, Short-circuit protection |
Power Supply
| Voltage |
Separate 230 V and 115 V versions available. Not selectable on the product. |
| USA / Canada / Japan |
100-120 V, 50/60 Hz |
| UK / Australia / Europé / Korea / China |
220-240 V, 50/60 Hz |
| Power consumption @ 4 ohms |
1050 W |
Dimensions / Weight
| Dimensions (H x W x D) |
93 x 483 x 326 mm (3.7 x 19 x 12.8") |
| Weight |
6.5 kg (14.3 lbs |
| Finish |
Black painted aluminium chassis and grey front |
| Approvals |
CE, cTUVus, PSE, RCM, CCC, FCC |
1. Connect the amplifier to an audio source with the balanced XLR or TRS input connectors.
PRODUCT FAQ:
Q: What type of output circuit does the Lab Gruppen PD3000 use?
A: The PD3000 uses a Class-D output stage.
Q: What is the maximum output voltage and current of the PD3000?
A: The maximum output voltage is 115V and the maximum output current is 32A.
Q: Does the PD3000 have a bridge mode?
A: No, the PD3000 does not have a bridge mode.