Crown
Crown Audio DCi 4/300DA DriveCore Install DA Series 4-Channel Amplifier 300W x 4 with Dante / AES67
Talk to a Pro
Chat with our Pros on Whatsapp
We're available from Monday to Saturday (9.30am-6.30pm GST)
Crown Audio DCi 4/300DA DriveCore Install DA Series 4-Channel Amplifier 300W x 4 with Dante / AES67
MM Market
Al Shoala Building, Near Deira City Center, Port Saeed Area
Techniline Electronics Showroom, Ground Floor, Block E
Dubai DU
United Arab Emirates
MM Warehouse
Al Shoala Building, Near Deira City Center, Port Saeed Area
Techniline Electronics Showroom, Ground Floor, Block E
Dubai DU
United Arab Emirates
Pay as low as Dhs. 3505.75\/mo. without fees with Tabby.
Free & Express Shipping in UAE Available.
KEY FEATURES
- Crown's proprietary and patented DriveCore technology
- Amplifiers are the next generation of PWM technology using high-quality, Class-D amplifier topologies
- Minimum Guaranteed Power Ratings: DCi amplifiers deliver the rated power in the specifications for long periods of time
- Direct Drive "Constant Voltage" capabilities on a channel by channel basis for 70 or 100Vrms amplification without the use of a step-up frequency limiting transformer for higher audio quality
- HiQnet Audio Architect supported amplifier
- Advanced PFC universal power supply provides efficiency, and is designed to deliver maximum power no matter where the amplifier is located; Universal AC input accepts 100 to 240 VAC, 50/60 Hz (±10%)
- DriveCore includes five patents that are also included in Crown’s flagship touring amplifier I-Tech HD4, providing versatility and durability
- TCP/IP based protocol in HiQnet for network monitoring and control
- Highly effective cooling system focuses airflow on parts that need it most, maximizing efficiency while minimizing heat and noise
- Integrated Dante / AES67 networked audio simplifies installation by enabling Dante / AES67 networked audio signals to be sent directly to the amplifier
DESCRIPTION
The Crown DCi 4/300DA DriveCore Install DA Series is a 4-channel power amplifier with Dante / AES67 networked audio and integrated DSP. The amplifier is capable of producing 300W of output per channel and works with 2-, 4-, 8-, and 16-Ohm speakers or with 70/100Vrms systems. Channels can be bridged for powering higher power applications such as a subwoofer.
The amp's advanced capabilities and support for Dante Domain Manager makes it well suited for installations that are standardized on Dante for networked audio transport. The Dante / AES67 ports provide primary and secondary connections for redundancy and will accept 48 and 96 kHz digital audio. Analog audio can be sent via Dante / AES67 pre/post processing (at 48 kHz). Network configuration, monitoring, and control are provided with HiQnet protocols over standard TCP/IP network connections. The HiQnet Audio Architect software allows for remote configuration, monitoring, and control of all aspects of the DCi-DA Series amplifiers. Additionally, a programmable General Purpose Input/Output (GPIO) port can be configured to control volume, recall presets, report errors to a third-party control system, and more.
The integrated DSP provides a comprehensive set of tools and features including LevelMAX limiting for inputs and outputs with thermal limiting, input compression, input & output delay (up to 2 seconds), input & output EQ, crossover settings, and a signal generator. The Crown DCi 4/300DA DriveCore Install DA Series 4-Channel Amplifier ships with four input connectors and a power cord.
SPECIFICATIONS
Output Channels |
4 |
Frequency Response (8Ω, 20Hz - 20kHz) | ±0.25dB |
Total Harmonic Distortion (at full rated power, 20Hz - 20kHz) | 0.35% |
Damping Factor (20Hz to 100Hz) | >1000 |
Load Impedance (Stereo/Dual Mode) | 2Ω - 16Ω; 70Vrms and 100Vrms |
Load Impedance Bridge Mono | 4Ω - 16Ω; 140Vrms and 200Vrms |
Cooling | Continuously variable speed forced air, front to back airflow |
Maximum Fan Noise (re dBA SPL @ 1M) | 45 |
Required AC Mains (±10%) | 100V-240V ~ 50/60Hz |
Power Connector | 15A IEC |
Dimensions (W x H x D) | 483 mm x 89 mm x 362 mm 19 in x 3.5 in x 14.25 in |
Weight | 9.12 kg (20.1 lbs) |